Wind Resistant Head              Crafted with Exotic and Domestic Woods

The Wind Resistant Head is more stable on windy days.  The head is constructed by laminating 3 selected woods.  Approx. 4 oz. of wood is removed by the slots which increases the amount of  weight added to the face of the mallet head for better torsional resistance. 

The head height is 2", width 2 1/2", length 10" to 12".

Mallet faces are SOLID BRASS in thickness required to meet Customers Specified weight. 

                                                 PRICE $430                  Add $30 for engraving


The Signature Head is constructed by Pressure laminating 3 selected woods.

The center section has holes drilled in specific locations for the purpose of increasing the face weight and increasing the Moment of Inertia which improves the torsional resistance.

 



Price $525               ADD $30 for Engraving

Wind Model 1.  All 3 woods the same.

The HUNTER Head was designed by Ben "HUNTER" Rothman.  Ben has been playing with his mallet since 2009 winning many many tournaments.

This design achieves the maximum Moment of Inertia per weight because of the vertical holes. 

NEW Signature Model with 4 Brass Corner Plates is avaliable.  $525.

Wind Model 2.  Top and bottom wood the same, center section different.

MORGAN HEAD​

The HUNTER Head


Signature Model 1.  All 3 woods are the same

The MORGAN HEAD is a Modified Trapezoid cross section inspired by Steven Morgan .  This design allows for additional end weight to be applied using brass corner plates which improves Moment of Inertia.

Signature Model  2.  The top and bottom sections are the same wood and the center section is different.


PRICE $480                   ADD $30 for Engraving

Signature Model  3.  The Side sections are the same wood and the center section is different.


Custom Signature Heads            Crafted with Exotic and Domestic Woods.           

  2" x 2 1/2" x 10" to 12"                    2" x 2 5/8" x 10" to 12"                        2" x 2 3/4" x 10" to 12"

The mallet faces are SOLID BRASS in the thickness required to meet Customers specified weight.

​                                                     PRICE $430                               ADD $30 for Engraving